[Battery] Pylontech US series

Driver name

pylonLv

Compatible devices

• Pylontech US series

Tested devices

• Pylontech US5000

Remarks

The RS485 add-on board with RJ45 jack is necessary to connect the battery. The following pin assignment must be soldered:

Signal	Pin
A	7
B	8

The following jumpers must be soldered:

Jumper	State
SJ1	closed
SJ2	closed
SJ3	closed
SJ4	closed

Installation steps

• set the baudrate of the battery to 115200 baudrate

• connect the B/RS485 port of the battery with the RS485 add-on board using an ethernet patch cable

• edit the configuration as documented in driver configuration